Sailing tool belt

Sailing Watches Sailing Watches. Marine Tapes Marine Tapes. Misc Traveller Systems and Parts Rigging. Dry Bags Holdalls and Dry Bags.

Add to Cart. Product Information FAQs Gill Marine Tool Be prepared for any situation with the Gill marine tool featuring an integrated shackle key, webbing cutter, 8mm spanner, flathead screwdriver and handy bottle opener! It has two main lockable blades: a straight blade and a wickedly sharp saw. Unlike the pliers on the Wave see over page , these are spring-loaded and easier to use.

It has a good range of tools, though some are fiddly to access. It also comes with a karabiner accessory, including a hex driver hole and a bottle opener. It has all the features one would hope to find, like various screwdrivers, small pliers, a reamer, a bottle opener, and a corkscrew. It features a large and a small blade, but like all blades on this knife, none of them lock open, so care is advised while using the reamer, corkscrew, and screwdrivers as they can fold while in use.

Not the most robust of knives, but it is small and light enough to be with you all the time. The blades came through the saltwater test shining, but the insides of the knife were less corrosion resistant.

None of the blades lock open. The only time this was a problem was when applying pressure while screwing — the driver blades can fold onto your hand. This knife has all the blades one could wish for, and while it has pliers, we missed a shackle key.

The version tested is the single-blade Offshore. The grip was comfortable and the best on the test. Not feature-laden, but a good simple knife. Aside from the pockets, there are also a couple of loops for long-handled tools, like hammers and the like. I find this neat little addition beneficial because it makes it easier for the user to carry more tools.

It is mainly because the harness guarantees ease in carrying heavy loads. Using adjustable suspenders made my life easier because I can carry more tools on my way up to the roofline. This also prevents me from having to worry too much about back pain later when I get home. The suspender also boasts plenty of padding to make it comfortable to wear. I also found out that the suspenders add more storage capacity, namely a slot for a cellphone and a smaller pocket for superglue tubes and the like.

This combo apron tool belt also comes with a convenient pouch handle. I truly like this feature because it allows me to conveniently carry the tool belt without causing the contents to spill out. Speaking of pockets, this combo tool belt has a total of Although this is not as many as that provided by other tool belts, the size and positioning of the pouches made the difference for this amazing product.

The best feature of the Gatorback tool belt, in my opinion, is the ventilated back padding. Unlike other tool belts, the padding in this one is composed of little rectangular patches of foam. It also has wide channels between them that provide ample ventilation. Although this belt is made for people with waistlines between 36 and 40 inches, if the prospective buyer needs a particular size, they just need to get in touch with Gatorback and they will customize one for them.

Although this contains just a small amount of leather, it is made of equally tough DuraTek fabric with a high-density web core. The construction of this belt is also top-notch. It is primarily because it features bar-tack stitching and reinforced joints using metal rivets. Although this does not come with suspenders, there are provisions for it if in case you want to use aftermarket ones. I even use the suspenders of an older tool belt and it fits perfectly. These are heavy-duty framers tool bags.

Aside from being constructed out of tough materials, I can also vouch for it being truly durable. You will notice such durability with its double-stitched seams and metal rivet reinforcements. This means that this pouch can and will last for years with proper care and maintenance.

This is also the ideal choice for framing nail bags as it has plenty of storage pouches. Not only does this have enough pockets but it also has two steel hammer holders so you have all the things that you need right at your hip. Although looks are not that important when it comes to working efficiency, it somehow does make you want to work harder when you know you have a good-looking tool belt. This tool belt is made of oil-tanned, top grain cowhide, which gives it an elegant look and feel.

Probably the best thing about this tool pouch is that it can be used by either right or left-handed people. The pockets are perfectly centered and balanced so you can place them on either side of the tool belt. In my opinion, the best thing about dead-on tool bags is that they have so many pockets.

There are seven external pockets and more than 30 internal ones. This is a dream come true for framers who want their tools and materials perfectly organized. The suspenders that come with this tool belt is also worthy of praise. I find this tool belt with suspenders very comfortable to wear, thanks to the gel padding.

I can also say that the cross-body design of this tool belt helps ensure that it stays in the right place. Another incredible thing about this product is that it is so lightweight. This is thanks to it being made entirely of ripstop nylon fabric. This construction material is so tough that you need to consciously make an effort to punch a hole through the stuff. The belt is around three inches wide, which is perfect for distributing the weight of the belt and its contents.

It is also nice that the fabric material is breathable. As the name suggests, a framing tool belt refers to a tool belt used by framers who refer to carpenters specializing in making the framing structures of houses. Most of the time, they are working on making trusses for the roof of the house, so they will need a tool belt that can let them carry their equipment conveniently and safely.

There is nothing that different between tool belts used by framers and those used by general contractors. The only real difference is that the ones used by framers have compartments for the tools that they usually use near their dominant hand.

This promotes further ease when working especially when you are standing more than ten feet off the ground. Tool belts are typically three-inch wide belts. You will notice that they are made by either leather or nylon canvas. These items also often come with pouches on either side. These pouches are separated into different compartments for the different tools and materials that the framers need to carry along with them.

Tool belts make it easier for the user to grab the tools that he needs. It is mainly because they are organized and arranged according to how commonly they are used in framing projects. For instance, the measuring tape and speed square are usually placed in a pouch on the left side and the pencils and other marking tools are on the right. Make sure to pick one that you will use depending on your style of working.

Some choices in terms of the different types of framing tool belts are:. This type is the most popular. I also discovered that it is the easiest to source and is famous for its compatibility with most tasks.

This means you will find this tool belt useful in whatever task you have in mind. The problem with this type of tool belt is that you can only carry a certain amount of tools before you start to feel discomfort around your waist area, especially if you need to wear the belt for hours on end. This type of tool belt can also be further divided into a single piece worn, or belt and extendable pouches.

Suspenders — I can say that these are the ideal choices when you will be carrying a lot of tools with you. In the case of framers, this is every time they go to work. The suspenders take all of the weight of the tools and other materials off the waist and place them squarely along the shoulders of the wearer. This can help in preventing lower back pain in the future.

A high-quality framing tool belt is one of the most important items in the life of a tradesman. With a good framing tool belt around, you are assured of the safe storage of all your essential tools. Some of the most viable reasons why you need it are:. Promotes ease in organizing your tools — You need this type of tool belt so you can decently store and organize your work tools.

With your organized tools, finding something you need to perform a particular task will be quick and easy. It also ensures that your tools will always be within easy reach. Aside from that, you have an assurance that you carry all the things you need for your job smartly. This will guarantee you of a hassle-free experience when working. Furthermore, you will have a smooth-sailing experience when storing your tools and reaching them whenever you need them.

Promotes productivity — This is possible because the tool belt will ensure that you can easily access your tools. With that, you can also maintain your focus. Allows you to move smoothly — Note that your job may require you to move a lot. If that is the case then you need a well-equipped tool belt attached to your waist and loaded with everything necessary to do your work. With that around, you can freely and smoothly move around. It is because the item will help free your hands to do more important stuff than carrying tools.

It is because the suspenders and the tool belt itself can help distribute the weight of your tools evenly. This can lessen the strain you might experience, thereby preventing pain in your hips and lower back.

This is beneficial if you want to keep yourself safe and ensure that your health will not be compromised when doing your job. Tools include universal pliers with serrated noses, wire cutters, saw, small and large knife blades, bottle opener, curve jaw plier, 3mm, 6mm and 8mm flared screwdrivers, and mini-file.

Its handles, body and blades are all stainless steel and it comes with a year warranty. This in-1 device is made from good quality stainless steel and has most of the popular multi-tool necessities in its small, 10cm-long framework. Supplied with a year warranty, it has pliers, cutters, screwdrivers, a saw, can and bottle openers and a file. Made by the manufacturers of the ubiquitous Swiss Army knife, the X has a plethora of blades, tools and functions — 28 of them to be precise.